Calgary 1-800-665-7867 | Toll Free 1-800-665-7867

Edmonton: 1-888-487-9188 | Toll Free 1-888-487-9188

Water Well Pumps

Keep your well running at peak performance with pumps, motors and controls from Webtrol. Western Pump is the exclusive distributor of Webtrol Pumps in Western Canada.

Webtrol submersible well pumps

Webtrol Submersible Well Pumps

The Webtrol line of 4” submersible pumps is one of the most complete in the industry. Webtrol offers three different lines of 4” submersible pumps: stainless Steel, brass and thermoplastic models. All three provide you with the same quality features such as stainless steel wear rings, positive seating check valve, and glass reinforced impellers for long life.

  • 4” submersible well pumps – Flows to 130 GPM / Heads to 1000’
  • 4” Turbine series – Flows to 100 GPM
  • 6” submersible pumps – Flows to 100 GPM

The Webtrol turbine series 4” submersible pumps have been designed for commercial, industrial, and irrigation projects that require higher flow rates at higher heads.

The Webtrol 6” submersible pump can be installed in 6” or larger diameter wells. The design of the 6” submersible allows the use of fewer stages than a 4” turbine, allowing for more efficiency.

Also Available

  • 6” submersible turbine pump – Flows to 400 GPM
  • I/C Submersible turbine Pump – Flows to 1500 GPM

Motors and Controls

4" Motor

4” Motors

  • 2 Wire_HP to 1_HP 115 & 230 volt 60 Hz single phase
  • 3 Wire_HP 115 $ 230 volt 60 Hz single phase_HP to 5 HP 230 volt 60 Hz single phase
  • 3 Phase_HP to 10 HP 230, 460 & 575 volt 60 Hz
6" Motors

6” Motors

  • Single Phase 5 HP to 15 HP 230 volt 60 Hz
  • 3 Phase 5 HP to 40 HP 230, 460 & 575 volt 60 Hz and 50 & 60 HP 460 & 575 volt 60 Hz

8” Motors

  • 3 Phase 40 HP to 100 HP 230, 460 & 575 volt 60 Hz and 125 HP to 200 HP 460 & 575 volt 60 Hz
Box control

Control Boxes

  • HP 115 volt 60 Hz
  • HP to 5 HP 230 volt 60 Hz

SubDrive Constant Pressure Water Systems

Franklin Electric’s constant pressure controllers use state-of-the-art technology to provide constant water pressure through variable speed control of submersible water well pumps.

SubDrive constant pressure water systems

MonoDrive allows the conversion of a single-phase conventional pump system to a constant pressure system with the simple replacement of a 3-wire control box. It serves applications with performance requirements in the 1/2, 3/4, and 1 HP range.

SubDrive75 is designed for use with a 3/4 HP pump mounted to a 1 1/2 HP Franklin Electric 3-phase motor. It provides 1 1/2 HP performance from a 3/4 HP pump and is ideal for applications such as large homes, ground source heat pumps, and sprinkler systems.

SubDrive150 is designed for use in residential or light commercial applications with a 1 1/2 HP pump mounted to a 3 HP Franklin Electric 3-phase motor. It provides 3 HP performances from a 1 1/2 HP pump, and is ideal for applications such as large homes, ground source heat pumps, and sprinkler systems.

Pump Protection

Pump protection

QD Pumptec is a solid state sensing device that monitors motor load and incoming power to automatically shut off a Franklin single-phase, 3-wire motor when related fault conditions are detected. QD Pumptec protects the life of your 4-inch pump and reduces the odds that you will ever have to see the motor.


Pumptec is a microcomputer-based pump protection device. It monitors motor load and power line conditions to provide protection against dry well conditions, waterlogged tanks, and abnormal line voltage conditions.


Pumptec-Plus is a solid state pump protection system designed for 1/2 to 5 HP single-phase submersible pump motors; it protects against a variety of fault conditions. Run and fault lights on the cover make diagnosis quick and easy. Push button Snap Shot™ calibration makes Pumptec-Plus simple to install and an effective troubleshooting tool.


Contact us for more information, or visit the Webtrol website.

Water treatmen solution

Treatment Solutions

Lift stations, packaged treatment plants, booster packages and more.

Pumps

Pumps

Well, sewage and effluent, Diesel and gas driven, centrifugal and more.

Water treatment system

Water Treatment

Softeners, filters, reverse osmosis, ultra-violet and more.

Rental pumps

Rental

De-watering, sewer bypass, contracted pumping, supply and more.

Pool ans spa accesories

Pool & Spa

Pumps, heaters, filters, chemicals and more.

Services

Services

Repair, testing, fabrication and more.

Calgary Location

11346 42nd Street (SE)

Calgary, AB  T2C 5C4

Edmonton Location

17860 106a Avenue (NW), office 101

Edmonton, AB  T5S 1V3

Hours

Monday 08:00 AM - 05:00 PM

Tuesday 08:00 AM - 05:00 PM

Wednesday 08:00 AM - 05:00 PM

Thursday 08:00 AM - 05:00 PM

Friday 08:00 AM - 05:00 PM

Methods of Payment

Cheque (for account holders only)

Social

Send to a friend

Send the url of this page to a friend of yours

yp.ca
Copyright Western Pump 2018 - Legal
Created by

Legal notice